China Good quality Customized A2 A4 Stainless Steel Eye Wood Screw (SS304 SS316) with Good quality

Product Description

Customized A2 A4 Stainless Steel Eye Wood Screw (SS304 SS316)

 

      A screw, or bolt, is a type of fastener, typically made of metal, and characterized by a helical ridge,known as a male thread (external thread) or just thread, wrapped around a cylinder. Some screwthreads are designed to mate with a complementary thread, known as a female thread (internal thread),often in the form of a nut or an object that has the internal thread formed into it. Other screwthreads are designed to cut a helical groove in a softer material as the screw is inserted. The most commonuses of screws are to hold objects together and to position objects.A screw will almost always have ahead on 1 end which contains a specially formed shape that allows it to be turned, or driven, with atool. Common tools for driving screws include screwdrivers and wrenches. The head is usually largerthan the body of the screw, which keeps the screw from being driven deeper than the length of thescrew and to provide a bearing surface. There are exceptions; for instance, carriage bolts have adomed head that is not designed to be driven; set screws often have a head smaller than the outerdiameter of the screw; J-bolts have a J-shaped head which is not designed to be driven, but rather isusually sunk into concrete allowing it to be used as an anchor bolt. The cylindrical portion of the screwfrom the underside of the head to the tip is known as the shank; it may be fully threaded orpartially threaded.

Product Name

CSK philip screw,CSK socket screw.Pan head Phscrew,Pan head socket 

screw,Socket cap head screw, set screw,Pan head torx screw,

CSK head trox screw,Wood screw

Standard: DIN,ASTM/ANSI JIS EN ISO,AS,GB
Material Stainless Steel: SS201, SS303, SS304, SS316,SS316L,SS904L 
Carbon steel:1571,1571, 
Finishing

Zinc(Yellow,White,Blue,Black),Hop Dip Galvanized(HDG) 

phosphorization,

Black Oxide,Geomet,Dacroment,anodization,Nickel plated,Zinc-Nickel 

plated

Customized Products
Lead time
Busy season:15-25days,Slack seaon:10-15days
Stock Products

Stainless steel: All DIN ,GB Standard and part ASNI standard  

stainless steel 

screws, Example: ISO7380,DIN7981,DIN7982,DIN916,DIN913,

DIN7985,DIN912

Free Samples for standard fastener
For more information visit:jxhnfastener

Our Services

  • Professional Manufacturer: All of our Fastener are designed and manufactured according to 
  • buyers’ specification and performance.
  • Quality is guaranteed: Durability testing and critical technical design to enhance fasteners 
  • lifetime.
  • Cost effective: Competitive prices with professional factory supply
  • Perfect fastening solution with 10 years experiences to solve your problem: Wide range of parts selection.
  • Customized Ideal Fasteners: customized services according to the samples and drawings 
  • offered

Certificate

RFQ
1.How do you let me trust you.

 We have own import & export right, and we are Gold mumber of alibaba and made in china, 

We get credit guarantee from Alibaba Group. you can make an order by alibaba to us directly. 

2.How about your price.

High quality products with reasonable price. Please give me a inquire, I will quoted you a price for 

you refer at once.

3. How do you control your quality.

We request QC inspect every productions links for each bacth goods.And we can provide you MTC

 and mill certificate when the goods is finished.

4.Could you provide free samples?

For new customer, We can provide free samples for standard fastener, But the clients will pay the 

express charges. For old customer,We will send you free samples and pay express charges by ourself.

5.Do you accept small order?

Sure, we can accept any orders, we keep lots of stock for ALL STAINLESS STEEL FASTENER, 

CARBON STEEL NUT AND PART BOLT,Like hex weld nut, cage nut, wing nut, square weld nut,

cap nut, hex nut,flange nut.Metric 8.8Grade,10.9Grade 12.9Grade Hex bolt and Hex Socket cap screw,

Part ASME Hex cap screw.

6.How about your delivery time

General speaking, if the goods is in stock, we can delivery them with 2-5days, If the quantity is 1-2container, we can give you with 18-25days,if the quantity is more than 2 container and you are very urgent, we can let factory priority 

produce your goods.

7.What is your packing.

Our packing is 20-25kg for one carton,36 or 48pcs cartons for one pallet. One pallets is about 900-960kg, We also can make customer’s logo on the cartons. Or we customized cartons according to 

customers’ requestment

8.What is your payment term

We can accept T/T,LC for general order ,Paypal and Western union for small order or samples order.

 

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
screwshaft

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China Good quality Customized A2 A4 Stainless Steel Eye Wood Screw (SS304 SS316)   with Good qualityChina Good quality Customized A2 A4 Stainless Steel Eye Wood Screw (SS304 SS316)   with Good quality